Return to site

How To Use A Tile Saw?

· Power tools

Today we are going to discuss 11 effective strategies about how to use a tile saw. When you have purchased your tile saw, the following central issue that rings a bell is "the means by which to use this"! Also, obviously, when you are buying make sure it's not one of those laws that are used in the development procedure. Because if you do, these laws won't only be damn costly but also incredibly cumbersome and heavy. It will be difficult for you to move this saw from place to place once they are heavy, specifically if they gauge 100 pounds or more.

If you are a beginner, the confusion would emerge too. What's more, for what reason wouldn't that be? Water, power, saw and the continuous turn of those precious stone powdered blades could be overwhelming to a learner who is holding the first tile of his life to put it on the board. But no stresses, when you have a proper thought of how to set the saw, place the tile and make the cut – this would turn out to be one of those coolest recollections of your life– I promise.

Presently, tile is used all over the place. Starting from the washroom shower to encompass tubs, kitchen backsplash to room floors – and so on, tiles will be there. Plus tile is a sort of material that beautifies a specific place as well as spreads the watery areas; make everything look flawless and put-together. Using a tile saw isn't advanced science, it's straightforward, quick and actually the most effective way to get your little home projects done at home, without anyone else. Result? A home with tiles shaped by YOU!

Let us look at all the steps that will enable you to achieve the good, professional, neatly cut tiles that will unquestionably meet your DIY specifications. Will we?

1. Know you saw, first!

Knowing your tile saw is utmost imperative before you begin using it. Know its specifications, highlights, capacities, qualities and the kind of slices it promises to give. Short Tip: Experience the manual instruction, give it some time. Trust me you'll make fewer slip-ups when you know about your machine properly. Know how the spotless water would go into the instrument, how the wastewater would go out and how the device would get its power source. These could be boring when you are going through the manuals (or YouTube), but these will spare a ton of your vitality later.

2. Place a bucket under the saw

The saw has a garden hose, whose one end is connected to the apparatus and the opposite end is free. When you begin the saw, the wastewater will begin coming out from the hose. Place the bucket under the saw so that the bucket gets filled up with wastewater coming from the hose, to anticipate it spilling all over the place.

3. Safety

When you are playing with both power and water, it's utmost essential that you avoid potential risk. Indeed, the facts confirm that you can't work without power when you are dealing with a wet saw, so saving yourself first with additional consideration would be a more astute choice. Remember to wear safety glasses, gloves, a cap, dust cover, and shielding cloth.

Moreover, make sure your saw has a "drip loop" in the electrical string that leads out from the saw to the outlet. The drip loop must be lower than both the saw and the outlet. Doing this would avert the water to drip down the saw to the electrical outlet.

4. Place the saw on a flat, and sturdy surface

You would prefer not to take a shot at a shaky saw that moves each time you inhale (alright that was an embellishment… but seriously if that occurs, it will be terrible!). To counteract such annoyances, place your saw on a heavy, cumbersome table and solidly position it on the surface. This is essential to get the exact straight or precise cuts on the tile.

5. Fill up the saw reservoir with water

Most of the saws have a plate of water settled underneath the saw surface. If your plate is removable, remove it, fill it up with water and after that stuck it again inside the saw. However, if the plate isn't removable then you may need to fill it up with a pitcher, physically. While you are filling water with a pitcher, make sure it doesn't flow out so quick that it soaks out the drain plate.

6. The water must flow to the blade

It is critical that the water flows freely and encompasses the cutting edge of the blade. Until and except if, the water has filled up to the degree that it encompasses the blade completely, DON'T begins cutting. If you do, it won't only hazard breaking both the blade and tile but also may cause you serious injury. There is a serious reason why specialists ask to completely submerge the cutting blade before you begin using it. The water in the plate keeps the blade cool, lessens gunking up of the blade and counteracts tile particles flying around all over.

7. Place the tile on the cutting table

When you place the tile on the cutting table, you ought to adjust the fence so that when the tile is pushed against the fence – the blade coordinates the pencil line denotes that is your ideal cutting region. It is educated to leave the most extensive part concerning the tile open between the blade and fence, doing this would enable you to keep your hand from the blade beyond what many would consider possible.

If you need to cut tile askew: Place a miter manage between the fence and tile. Doing this will keep the tile situated at a rakish dimension, more specifically, at a 45-degree point to the blade.

If you need to cut tile halfway (L shaped): At times you may need to shape a tile in L shape to support the corners or maybe, to outskirt the electrical outlet. For this, place the tile as you would do with a complete cut. At that point, feed the tile into the blade up to the profundity you require.

8. Before you turn on the power switch

Check your hands, it is dry or sweat-soaked? Your hands must be completely dry and free of clammy before you switch on the power.

Mind your other hand, where is it now? Is it within the tile saw region? Make sure your other hand is with you, not touching the plate water or tile while you are switching on the power.

  • The blade must touch nothing, aside from the tile it intends to cut.
  • Ensure that the blade is splashed with water before it begins cutting
  • Only when all the above criteria are fulfilled, you may switch on the power.

9. Push the tile into the saw blade

In case of a wet tile saw, the rotating blade remains consistent in its place. It is essentially the sliding work plate that moves, keeping the tile alongside it into the blade.

Slowly, you should feed the tile into the blade. Refrain from any pulling, tugging or pushing the tile towards the blade, rendering the normal power of the blade. The blade will carry out its responsibility independent from anyone else, pushing the tile will hinder the entire procedure. Make sure you are taking additional consideration when the blade is at the edges of the tile, this is the place most of the tile breaks, draining all the diligent work.

Usually, artistic tiles are the least demanding to cut and shape. Porcelain, then again, requires your utmost persistence and care to get into shape. But whichever tile your work upon, make sure your hands are kept at the most secure separation while you are working with blades.


To know more details about dewalt heavy duty wet tile saw read more

10. Check if there is sufficient water around the blade

  • You must make sure the blade is rotating inside the water at the most noteworthy speed
  • The tile is gliding towards the rotating blade effectively, without jamming
  • There is free water flow around the blade
  • No tiles particles are roaming/flying around the rotating blade and cutting territory

11. Switch off the saw

When you are finished with cutting or shaping your tiles, cautiously remove the tile and its pieces from the blade. Set up your next tile and in the interim, switch off your power source. Give the blades a couple of moments to discharge its warmth wave inside the water and chill before the following usage.

These are the ways which, if you pursue, would finish up with exact cut tile for any remodeling or DIY purposes. But before I end, here are not many expressions of alerts:


Never endeavor to use the wet saw without submerging its blade in the water. Doing this would cause harm to the blade as well as make enormous dust, which is unsafe to the eye and mucous film.


When you are finished cutting, the crisp edge of the tiles can be very sharp. Proper alert must be taken while handling them.


In this way, here you go… a completely fledged-wet-saw-instructed individual you are. I'm sure whenever you are up for tile cutting; you will execute it (in the most OK way, obviously). Just remember to play it safe, you will be all good!

All Posts

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly